Skip to content
35+ years of concrete experience
Athletic Courts in Denver and the Front Range

Athletic Courts

A court in the backyard, built to play on.

A sport court has to be flatter than a driveway and drain without leaving puddles on the playing surface. We lay it out to the dimensions you want, pour it with the slope and finish your surfacing needs, and set footings for the hoop, posts and fencing before the concrete goes in.

Typical price$5,400–$10,800 for a half-court slabinstalled · free written estimate
(720) 459-9091
Footing for the hoopFlat, sloped to drainReady for coatingCompacted baseRebar on chairs
How we build a court
What we build

Athletic Courts, start to finish

  • Backyard basketball courts
  • Pickleball and tennis slabs
  • Multi-sport and half courts
  • Hoop and net-post footings
  • Surface-ready finish for acrylic coatings
Key considerations

What goes into it

  1. 01Flatness across the playing area
  2. 02Drainage slope that doesn’t affect play
  3. 03Joints placed off the lines
  4. 04Footings for hoops and nets
  5. 05Cure time before coating

Good concrete starts long before the truck arrives. Our experienced team knows what to look for, what questions to ask, and which details can make the difference years down the road.

What's under the surface

A slab sized for what sits on it

Not to scale · sized to each job
12345Hot tub, RV, shed or equipmentNative soil
1Point loads: a filled hot tub can weigh as much as a car, all on a few square feet.
2Compacted base sized for the load, so the slab is supported evenly from edge to edge.
3A vapor barrier under interior floors keeps ground moisture out of the room above.
4A rebar grid on chairs, with thickened edges where the load reaches the perimeter.
5Joints cut the same day, before shrinkage can pick its own crack line.
How it runs

Estimate to final walkthrough

  1. 1Layout and dimensions on site
  2. 2Written scope with a clear price
  3. 3Grading, base, forms and footings
  4. 4Pour, finish, cure and walkthrough
Finish options

Straightforward or decorative

Broom finish

Fine ridges for traction on snow and ice. The standard for driveways and walks.

Exposed aggregate

The top layer washed back to show the stone. Grippy and good at hiding wear.

Stamped

Patterned to look like stone, slate or brick, at a fraction of the cost.

Integral color

Color mixed through the concrete, so chips and wear don’t show grey.

Smooth trowel

Dense and flat for garage floors, shops and courts.

Sealed

A penetrating sealer before the first winter to resist water and de-icer.

Where you live changes the job

A court on bentonite clay is a different job than one on river sand

The Front Range has four distinct ground conditions, and each one changes how we prepare the base, reinforce the slab and handle water. Your community page has the specifics.

Expansive clay plains

Remove the soft and organic soil, bring in compacted road base, set rebar on chairs, and plan joints and slope so water runs away from the house instead of soaking the clay beside it.

Foothills and tilted bedrock

Deeper excavation and a thicker compacted base, reinforcement sized for uneven support, and drainage that intercepts runoff above the slab, often paired with a retaining wall where the grade demands it.

River sand and gravel

Compaction done in lifts, geotextile fabric where the native soil is soft, and a thicker section anywhere a truck, trailer or RV will park.

Palmer Divide uplands

Air-entrained exterior mix, proper curing, a penetrating sealer before the first winter, and a broom texture for traction on sloped driveways.

Questions about athletic courts

Athletic Courts: what people ask us

A concrete slab for a 30 by 30 foot half court usually runs $5,400–$10,800, and $9,000–$18,000 finished with an acrylic surface, lines and a hoop. Size, grading and fencing make the biggest difference.

Typical prices for every kind of project are in the Denver concrete cost guide, and general questions are on the FAQ page.

Get a clear price on your court.

You'll know, without question, what your project involves, what it costs, and what to expect before work begins.

(720) 459-9091